Metal Parts Chrome Plating Surface

1When the small thickness of the chrome plating (for steels, in 0.1mm or less, and for cast iron, in 0.05mm or less), only to be polished before and after the chrome, then, grinding allowance 0 .01 ~ o. 015mm.
2 When the chrome plating than 0.1mm (for steels) or 0.05mm time (in terms of cast iron), you will need grinding chrome plating, so that it reaches the desired size.
3 grinding, to the special grinder, grinding wheel with a particle size of 48 to 60 to conduct, and to adequately wetted parts with cutting emulsion for cooling.
4 grinding, they should not be removed once very thick layer of chromium, chromium layer in order to avoid the occurrence of burst and burning.
5 allowance for grinding chromium layer between 0.04 ~ 0.08mm per side, which in the calculation of the chromium layer thickness repair parts required and should be estimated to account.
Product link: http: //www.metalpartscustom.com/metal-parts-chrome-plated-surface.html
Metal Parts Chrome Plating Surface